Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #666


    What is the output impedance of the SEND feature on the MD7?



    Hi…as per my knowledge SEND feature to run signal through stomp boxes for variety of effects.The SEND is an unbalanced (TS) output which is taken after the class A buffer amp, but before the discrete opamp, so you can control the level using the TRIM only. This can be used for interfacing with a variety of guitar and bass pedals and effects and going into them at the correct level without overloading . You can then come back from the effect pedal back into the DI INPUT / RETURN and use the stepped gain for setting the perfect level.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.